Pick a software title...to downgrade to the version you love!

Do you have a problem in opening RAR files in your MAC? Try RAR Extractor! RAR Extractor is an advanced software that deals with RAR file. Programs for query ″rar extractor dmg″ GUI Tar. 4.7 on 53 votes. During the command-line era of computing, archiving files involved cryptic commands such as tar -xvf somefile. UnRarX is a lightweight and user-friendly macOS application that you can use to extract RAR archives to a location of your choice. Handy and very easy-to-use RAR unarchiver. UnRarX features a simple and clean interface with a minimalistic interface that makes it easy for you to decompress multiple RAR.

WinRAR 4.00 Change Log

Windows users may install WinRAR, which supports more archive types, including RAR and ZIP formats. WinRAR For mac provides both a graphical user interface. While RAR and GUI WinRAR have a similar interface. Some differences exist. So it is recommended to use this rar.txt manual for console RAR (rar.exe in case of Windows version) and winrar.ch. Enhances Open and Save dialogs. Powerful file/URL/email launcher utility. Reliable backups, drive clones, and folder synchronizations. Run Windows apps alongside Mac apps without rebooting. Replacement for the built-in Archive Utility. The Mac's oldest and smartest DVD-backup app (was MacTheRipper).

Version 4.00

• RAR decompression speed is improved. Depending on data type, decompression can be up to 30% faster than in previous versions. Both the general RAR algorithm and most of special RAR multimedia methods benefit from this improvement. The only module of RAR algorithm, which is not affected, is 'Text compression' method.
• 2. Changes in ISO support:
• UDF support is upgraded to UDF 2.50 revision. It makes possible to unpack most of Blu-ray ISO files;
• when browsing UDF ISO file, UDF revision number is displayed after the 'UDF' format name in WinRAR address bar and in archive information dialog;
• WinRAR sets the folder modification date when unpacking folders stored in UDF and ISO9660 files.
• 3. Changes in password dialog:
• a) WinRAR uses the same format of password dialog both when archiving and extracting, so 'Show password' option is available also when extracting;
• b) 'Organize passwords...' button in password dialog provides access to password organizer interface, where you can specify your frequently used passwords. You will be able to access these saved passwords using the drop down list or autocomplete feature in password dialog.
• It is important to know that saved passwords are not encrypted and anybody having access to your computer can view them. Use 'Organize passwords' feature only if your computer is protected from unauthorized access;
• c) 'Use for all archives' option is available in password dialog when unpacking several archives at once. You can utilize it to apply an entered password to all archives.
• If you use this option with an empty password, WinRAR will skip all encrypted archives;
• d) Unlike previous versions, the password from default compression profile is not used for extraction. If you wish to use the same password for all extracting archives, press 'Organize passwords...' button in the password dialog and define a new password entry, specifying '*' file mask in 'Select for archives' field.
• 4. In Windows 7 WinRAR will display the total operation progress also on WinRAR icon on Windows taskbar. You can disable it using 'Taskbar progress bar' option on 'General' page of WinRAR settings.
• 5. Numerous Unicode support improvements allow to process non-English file names more smoothly. These improvements include:
• a) better Unicode handling in WinRAR in 'Rename', 'Convert', 'Find' and other commands, in folder tree panel, in password request dialog and in many other parts of WinRAR interface;
• b) correctly displayed Unicode names in WinRAR items in Explorer context menus;
• c) Unicode support in .lng files, making WinRAR localization possible for Unicode only languages.
• 6. Changes in -x switch syntax. Now you can specify a wildcard exclusion mask for folders. Such mask must have the trailing ' character, like -x*tmp* or -x*temp
• 7. New 'Extract relative paths' option in 'Advanced' part of extraction dialog. If you browse some archive subfolder in WinRAR shell and enable 'Extract relative paths' option, the path part up to and including the current subfolder will be removed from extracted file paths. For example, if you are inside of 'BackupMyData' archive folder and extract 'Images' folder, it will be extracted as 'Images', not as 'BackupMyDataImages'.
• This option is the new default extraction mode, but you can change the default back to WinRAR 3.x style. Just select 'Extract full paths' and then press 'Save settings' in 'General' part of extraction dialog.
• 8. Windows 98, Windows Me and Windows NT are not supported by WinRAR and WinRAR self-extracting modules anymore. Minimum Windows version required for WinRAR 4.0 is Windows 2000. If you need to run WinRAR on older Windows, you can download previous WinRAR versions from ftp://ftp.rarlab.com/rar
• 9. If TAR, TAR.GZ or TAR.BZ2 archive contains symbolic or hard links and if destination file system is NTFS, WinRAR will create these links when unpacking such archive. WinRAR will create symbolic links as symbolic and hard links as hard in Windows Vista and newer and it will create all links as hard in older Windows.
• If destination file system is FAT32 or any other not supporting file links, WinRAR will skip links when unpacking TAR, TAR.GZ and TAR.BZ2 archives.
• 10. Recovery volume processing involves less disk seek operations resulting in higher performance.
• 11. You can select Windows 7 library in tree panel in extraction dialog and WinRAR will use its default save location as the destination path.
• 12. 'Report' command allows to select HTML, Unicode text and usual text as output format for report file. Unlike previous WinRAR versions, now WinRAR preservers Unicode characters in reports when using HTML or Unicode text format. So non-English characters in file names will be displayed properly in such reports.
• 13. Message list in GUI SFX archives displays only operation status and error messages. It does not contain names of all extracted files anymore. This change improves the speed and reduces memory requirements for SFX archives containing a large number of files. Also it makes easier to locate error messages, because they are not hidden among extracted file names.
• 14. GUI SFX archives display 'Extract' button instead of 'Install' if no 'Setup' or 'Presetup' commands are present in the archive comment. If you prefer 'Install' button, but do not need to execute any setup programs, you can add 'Setup=<>' command.
• 15. WinRAR displays the current percent above the operation progress bar when repairing an archive containing the recovery record and when processing recovery volumes.
• 16. WinRAR limits the maximum possible volume size to 4 GB minus 1 byte when creating RAR volumes on a disk with FAT or FAT32 file system in volume size autodetecting mode. These file systems do not support 4 GB and larger files.

• 17. If 'Wait if other WinRAR copies are active' option is enabled and WinRAR waits for another copy, you can press 'Continue' button in command progress window to force WinRAR to stop waiting. So now 'Continue' button allows to override the state of 'Wait if other WinRAR copies are active' option for current operation.
• 18. WinRAR displays one password request instead of two, when saving an encrypted file back to RAR or ZIP archive after modifying it in some external editor. Previous WinRAR versions usually requested the password twice, both when extracting the original file and archiving its modified copy. Only RAR archives with encrypted file names were processed with the single password prompt.
• 19. New error code 10 ('no files') is added to list of error codes returned in command line mode by RAR and WinRAR. This new code can be returned by archive, extract, delete and repair commands. It means that RAR did not find any files matched the specified file or archive mask.
• 20. File name area in file overwrite dialog occupies several lines now. It makes possible to display much longer names.
• 21. Now switch -ep3 converts not only disk letters, but also UNC paths. So servershare will be converted to __servershare when archiving and restored to the original servershare when extracting with -ep3.
• 22. New 'Background extraction' option in 'Advanced' part of extraction dialog places WinRAR into background, when extracting files. You can save its default state with 'Save settings' button in 'General' part of extraction dialog, just like for other extraction options. 'Background archiving' option from the default compression profile does not affect the extraction behavior anymore.
• 23. 'Mode...' button in operation progress window is enabled also when extracting or testing archives. It provides access to 'Command parameters' dialog, where you can set 'Turn PC off when done' option for extraction and test operations. Previously this dialog was accessible only when archiving.
• 24. Bugs fixed:

• a) renaming a file in archive could also rename all other files with the same name in other folders of the same archive;
• b) previous versions displayed the wrong total packed size in 'Info' command for multivolume CAB archives;
• c) in ZIP archives 'U' (update) and 'F' (fresh) commands could erroneously update even files not specified in the command line. It happened only for files in current folder which names matched files in ZIP archive. This bug was not present in usual 'A' (add) archiving mode.

WinRAR 4 Builds

WinRAR Comments

For RAR and WinRAR END USER LICENSE AGREEMENT (EULA) klick here

What is a RAR file?

RAR files are compressed file(s) or data containers that can be created using WinRAR. They can hold one or more files or folders and can compress, open and encrypt RAR and ZIP files.

RAR is the native format of the WinRAR Archiver.

WinRAR is the Windows version of RAR and includes the shell mode version or Graphical User Interface (GUI), as well as the command line option.

After you receive or download a RAR file from the Internet or via email, you need to extract its contents in order to use them. This can be done in 2 simple steps:

1. Double-click on the file and it will be displayed in WinRAR. You can then select which files or folders you want to extract.
2. Click the 'Extract To' icon at the top of the WinRAR window, choose the destination folder (the folder where you want to store the RAR file) and click OK.

You will find the extracted file(s) in the destination folder where you saved them.

How do I open a RAR file with WinRAR?

In order to extract or open a RAR file using WinRAR in the shell mode (GUI), you must first open the required archive in WinRAR. This can be achieved in one of several ways:

• double-click or press Enter on the archive name in the Windows (Explorer or Desktop). If WinRAR was associated with archives during installation (the default installation option), the archive will be opened in WinRAR. You also may associate WinRAR with archives after installation using the Integration settings dialog;
• double-click or press Enter on the archive name in the WinRAR window;
• drag-and-drop an archive to the WinRAR icon or window. Before doing this ensure that WinRAR does not already display another archive, otherwise the dropped archive will be added to the currently displayed archive;
• run WinRAR and choose the Wizard option in the WinRAR toolbar. Choose the option “Unpack an archive” and follow the step-by-step instructions
• run WinRAR from the command line with a single parameter - the archive name.

When an archive is opened in WinRAR, its contents are displayed. Select the files and folders, which should be extracted (opened). You may do this by using the Shift + arrow keys or Shift + left mouse button as in Windows Explorer and other Windows programs. Also, in WinRAR it is possible to select files using the Spacebar. 'Gray +' and 'Gray -' keys on the numeric keypad allow you to select groups of files using file masks.

Having selected one or more files, click the Extract To button at the top of the WinRAR window or press Alt+E. Enter the destination folder (where you want the folder to be saved to) in the dialog box and click OK. This dialog box also offers a few advanced options.

During the extraction process, a window will be displayed showing the operation statistics. If you wish to break the extraction process, click on the Cancel button in the command window. You may press the 'Background' button in this window to minimize WinRAR to the tray. If the extraction is completed without error, WinRAR will return to the shell mode (GUI). In case of an error, a Diagnostic message window will be displayed.

What is the maximum file and archive size limit for RAR?

The internal format of RAR and ZIP archives that have been created with WinRAR, allows you to store practically any number of files of practically any size. The actual limit depends on the file system's available memory. Some older file systems do not support files larger than 4 GB.

To create archives larger than 4GB, you will need to use NTFS.

WinRAR is able to handle files of practically unlimited size (up to 8,589,934,591 GB).

In general, the RAR archive format is optimal for heavy tasks involving huge number of files and gigabytes of disk space.

How do I register and install WinRAR?

Before you can register WinRAR, you need to purchase a license. The most convenient way to purchase your license is to order it online.

You can purchase your WinRAR license in our online shop and make your payment via any major credit card, PayPal or direct debit. Other local payment options may be available depending on your location.

Upon receipt of the license registration fee, you will receive an email containing an attachment with the registration key file that corresponds to the user name string (first and last name or company name) which you have chosen when ordering your license. This file is usually named rarreg.txt.

The registration email contains all necessary instructions, which are easy to follow.

Below is also a brief explanation of the registration procedure:

• Please download the most current version of the WinRAR trial version in your language here.
• Please install the WinRAR trial version on your computer with simple double-click on the install archive.
• Please register the WinRAR trial versions on your computer with a simple double-click on the archive, rarkey.rar, that we have sent you via e-mail.

You will see a message: Registration has been successfully completed:

'This WinRAR copy has been successful registered. Thank you!'

• To check if the registration was completed, please run WinRAR
• (Start --> WinRAR) or (Start --> Search 'WinRAR'.
• Your registration data will be displayed in the 'Help' -->'About WinRAR' dialog.
• Please make a backup of the file rarkey.rar.

The WinRAR registration is finished.

RAR vs ZIP

WinRAR is able to create archives in two different formats: RAR and ZIP.

Here is a comparison of these formats:

• RAR archives

Typically, the RAR format provides better compression than ZIP, especially in the solid mode. WinRAR multi-volume archives in the RAR format allow more functions such as self-extracting archives.

RAR format has also a few important features that are missing in ZIP, such as the recovery record, which allows you to reconstruct damaged data and lock important archives to prevent accidental modification.

Both RAR and ZIP formats are able to handle files of practically unlimited size (up to 8,589,934,591 GB).

• ZIP archives

Another popular archive format is ZIP. If you are going to send an archive to somebody but you are not sure that the recipient has WinRAR to extract the archive contents, it might be a good idea to use the ZIP format. Although, you may also send a self-extracting archive, which the recipient can open even without having WinRAR installed on their machine. Such SFX archives are slightly larger, but can be extracted without external programs.

How do I create a RAR archive with WinRAR?

Firstly, you need to run WinRAR. Double-click or press Enter on the WinRAR icon. You can also start it from the Windows 'Start menu': under 'Programs' then 'WinRAR' and then run the 'WinRAR' program.

When WinRAR is running it displays a list of files and folders in the current folder. You need to go to the folder, which contains the files you wish to archive. You may use Ctrl+D, the disks list below the toolbar or click on the small disk icon in the bottom left corner, to change the current disk. Press BS, Ctrl+PgUp, small 'Up' button below the toolbar or double-click on the folder named '..' to go to the parent folder. Press Enter, Ctrl+PgDn or double-click on any other folder to enter that folder. Ctrl+ will set the root disk folder as the current folder.

When you have entered the folder with the desired files, select the files and folders, which you are going to archive. This may be achieved by using Shift + arrow keys or the mouse as in Windows Explorer and other Windows programs. It is also possible to select files using the Space or Ins keys. 'Gray +' and 'Gray -' keys on the numeric keypad.

Having selected one or more files, click on the Add button at the top of the WinRAR window, press Alt+A or select the 'Add files to archive' command in the Commands menu. Enter the destination archive name in the dialog box which appears or simply accept the default name. You may select, in this dialog, the format of the new archive (RAR or ZIP), compression level, volume size and other archiving parameters. Click on the OK button when you are ready to create the archive.

During the archiving process, a window will be displayed showing operation statistics. If you wish to break the archiving process, click on the Cancel button in the command window. You may press the 'Background' button in this window to minimize WinRAR to the tray. When archiving is completed, the command window disappears and the newly created archive becomes the currently selected file.

It is also possible to add files, to an existing RAR archive, using drag-and-drop. Select the desired archive in the WinRAR window and press Enter (or double click) on its name. RAR will read the archive and display its contents. You may now add files to the archive by simply dragging them from another program and dropping them to WinRAR.

Novice users can also use the Wizard to create an archive. Run WinRAR and choose the Wizard option in the WinRAR toolbar menu and choose the option 'Create a new archive' and follow the step-by-step instructions.

How can I split files into multivolume RAR archives?

WinRAR can create an archive consisting of several files.

These archives are called multivolume archives and the individual files inside these archives are known as volumes. Generally, volumes are used to store large amounts of data on removable disks, or to transfer data by email.

If you want to compress and split your file(s), you can select the desired volume size in the 'Split to volumes' field in the archive name and parameters dialog under the general tab.

By default, the size of the split volumes is entered in bytes, but if you add a lowercase letter 'k' at the end of the volume size, the entered value will be considered as kilobytes (multiplied by 1024).

Use an uppercase 'K' to denote thousands of bytes (multiply by 1000), 'm' means megabytes and 'M' - millions of bytes.

It is also possible to select the volume size from the list associated with this item. Note that if you are archiving to a removable disk, you may select 'Autodetect' from the list and WinRAR will choose the volume size automatically for each new volume.

For multiple CD's you can enter for example '700m' for 700MB CD's. WinRAR creates a multi-volume archive (volname.part001.rar, volname.part002.rar, etc.) All volumes are 700MB but the last volume may be smaller.

After this, you can burn the volumes on CD or DVD or save it on a USB stick.

Some burning programs have a special test mode with which you can determine the maximum capacity of CD blanks, so you can enter the maximum size for the volumes.

To unpack these volumes, you should start the extraction from the first volume. Select 'Process all files in all volumes from the current' in the menu that appears.

If volumes are stored on non-removable media like a hard disk, you need to put all volumes into the same folder before starting the extraction.

To repack a single RAR or ZIP archive into multivolume archives, please use the convert function in the WinRAR tools menu.

It is impossible to add, update or delete files in already existing volumes. You can only create a new volume set.

Starting from version 3.40, WinRAR stores the volume number inside the RAR files. You can see this number at the top of 'Show information' dialog if you apply Show information command to volume. This number may be useful if the original volume names are lost and you need to restore the correct names manually.

I have forgotten the password for my RAR archive. How can I recover it?

RAR encryption does not contain backdoors, so the only possible way to recover a lost password is to test all possible character combinations. (Brute Force) There are many password-cracking tools available online, but none of these are supported by WinRAR, and are used at your own risk.

Remember that if you lose your password, you will be unable to retrieve the encrypted files; not even the WinRAR author is able to extract encrypted files that have been password protected.

The use of strong encryption in WinRAR can sometimes lead to a negative outcome.

What is the WinRAR Wizard interface?

The WinRAR Wizard is designed for novice users and allows them to perform basic compression and decompression operations using simple step-by-step instructions:

Click on the Wizard icon in the WinRAR toolbar to display the Wizard dialog.

By default, this button is visible both inside and outside of archives, but you may disable or enable it like all other toolbar buttons with the 'Select buttons…' option in the General Settings dialog. Another option in the 'General settings' dialog, called 'Activate Wizard on start', allows you to run the Wizard every time WinRAR starts.

Winrar For Mac Guide

The Wizard dialog contains three of the most common actions that WinRAR can perform. How to unpack an archive, create an archive and add files to an existing archive.

More detailed instructions for using WinRAR can be found in the Help menu.

What is the difference between the command line and shell mode in WinRAR and RAR?

In addition to the WinRAR shell mode (GUI), you will also find the file rar.exe.

It is also a RAR version for Windows, but it only supports the command line text mode interface.

The RAR command line version is convenient when you need to call RAR from BAT and CMD files or to use it at the command prompt.

RAR is only available in the command line mode for Mac OS.

The RAR command line supports a larger number of functions when compared to WinRAR, but does not support ZIP and other formats.

Although there are common aspects of the command line WinRAR syntax also available in the WinRAR shell mode (GUI), the descriptions of the switches and commands which are supported only by the command line version, are not included here.

You should read the rar.txt file for a detailed description of all RAR command line features.

I get the error message 'CRC failed in file name. The file is corrupt!'

The File data are corrupt. The archive may have been damaged after creation. In this case it is sometimes possible to repair it if the recovery record has been applied.

It also could have been damaged during creation due to hardware failures (usually caused by an over-clocked CPU or unreliable memory).

In the latter case the recovery record will not help. The only way to detect if the repair will help is to try to apply the repair command to the archive and test the results.

Check if you have installed the most recent version of WinRAR. If not, please download the actual WinRAR/RAR version here. We always try to improve WinRAR’s functionality with each update.

I get the error message 'Packed data CRC failed in volume name. The volume is corrupt!'

This message may be displayed together with the message 'CRC failed in file name. The file is corrupt!', and may help you to detect exactly which volume is corrupt. This is especially useful if a big file has been split into several volumes, and only one volume has been damaged after archive creation.

Depending on the corrupt archive details, RAR may display or skip this message.

The message 'CRC failed in file name. The file is corrupt!' is always displayed if the file data have been damaged.

Winrar For Mac Full

Check to see if you have installed the recent version. If not, please download the actual WinRAR/RAR version here. We always try to improve all user functions with each update and patch any security vulnerabilities which may have arisen.

Are WinRAR licenses perpetual or is there a subscription?

WinRAR licenses are perpetual and valid for a lifetime.

You cannot register your license without purchasing it first, and WinRAR is not a free product. We offer all users a 40-day free trial, after which time the use of WinRAR without a valid license is in violation of our EULA.

Perpetual licenses mean that you can install and use your license for as long as you wish, but to stay up-to-date you must purchase a Support & Maintenance Package entitling you to all upgrades and updates within the 12-month period.

My computer crashed and I lost my WinRAR license key, what can I do?

If you lose your WinRAR license key, we can resend it to you via email.

To resend your WinRAR license we need the following information to be able to locate your key in our database:

• Your name or company name the license was registered to
• Email address used when purchasing your license
• The confirmation email you received when you purchased your license (useful, but not essential)

Winrar For Mac Installer

Send an email with the information mentioned above and your request to resend your license to: sales@win-rar.com

Please note that due to the GDPR regulations, we are unable to resend keys that were purchased more than 3 years ago

Can WinRAR be installed on a server?

Yes, WinRAR can be installed in a server or network environment. A separate license must be purchased for each separate client or workstation on which WinRAR will be installed, used or accessed. A separately licensed copy is required regardless of whether the client or workstations will use WinRAR simultaneously or at different times.

For example, if you wish to have 10 different clients or workstations in your network with access to RAR, you must purchase a 10-user license.

All licensing information can be found in our EULA.

I didn’t receive my license key. What should I do?

Once your payment has been approved, you should receive your WinRAR license key via email within 48 hours. Your email provider may have delivered the email containing your license key to your Spam or Junk folder, so always check there too. If it has been longer than 48 hours, please contact us at WinRAR, and we will arrange to have your license key resent to you.

How do I upgrade WinRAR?

When upgrading your WinRAR software to the latest version, there is no need to uninstall the program first. Just follow these steps:

1. Make a back up of your license key (rareg.key).
2. Download the latest version and save it to your hard-drive.
3. Ensure that WinRAR or RAR is not running anywhere else on your machine.
4. Double-click on the newly downloaded latest version and install WinRAR or RAR over your existing installation (all of your setting and configurations will be preserved).
5. WinRAR automatically checks your machine for the presence of a license key each time it launches and will detect your license key during start-up.